Beckett 7590C0001U, GeniSys® 24V Gas Burner Control, Lockout Time 4 sec max

Product Detail

Beckett 7590C0001U, GeniSys® 24V Gas Burner Control

Features & Benefits

• 3 LEDs provide basic diagnostic information
• Single or multiple trials for ignition before lockout
• Designed for easy mounting on a 4 x 4 junction
• Selectable ignition timing 4-15 seconds
• Selectable pre-purge timing 1-240 seconds
• Selectable relight or recycle operation on loss of flame
• The microprocessor is checked for proper operation before each cycle
• Checks combustion air proving switch contacts on 7590C and D models
• Gas valve relay check on each cycle
• Available model (7590C) with manual reset button and non-volatile lockout
• Communication Port links new alarm module and future products
• For use on natural or LP gas
• Provides reliable proof of flame using flame rectification

The standard 7590 is designed for use on applications below 400,000 BTUs. For applications above 400,000 BTUs, contact Beckett’s Engineering Group.

Outputs

• • Main Valve Rating: 2.0 amps
  • Motor Relay Rating: 7.4 amps (120 V)
  • Igniter Relay Rating: 1.0 amp (120 V)

Approvals

• • UL listing per ANSI Z21.20, UL372 and CSA C22.2 No. 199

Timings

• • Ignition Timing: 4-15 seconds
  • Pre-purge Timing: 1-240 seconds
  • Inter-purge Timing: 90-300 seconds

Additional Ratings

• • Minimum Flame Current Required: 1.0 µA
  • Flame Failure Response Time: 0.8 seconds (maximum)
  • Thermostat Voltage: 24 Vac (if used)
  • Heat Anticipator Setting: 0.2 amps + gas valve current draw (control is not polarity sensitive)

Environmental Ratings

• Storage & Operating Ambient Temperature: -40°F to +175°F (-40°C to +79.4°C)
• Moisture: 5 to 95% RH, non-condensing