Beckett 7565U, GeniSys® Advanced Oil Burner Control

Product Detail

Beckett 7565U, GeniSys® Advanced Oil Burner Control

Features & Benefits

• Last 50 cycles and last 15 faults history
• Compatible with burners running #2 fuel oil, up to 100% biodiesel, and up to 100% renewable diesel
• Separate inputs for combustion air and blocked vent
• Enhanced diagnostics and programming through the myTechnician™ app
• Configurable for interrupted or intermittent ignition operation
• Configurable timings for valve-on delay (or “pre-purge”) and motor-off delay (or “post-purge”)
• Eight status lights provide hands-free understanding of burner operation
• Pump prime mode for technicians
• Extra terminal for compatibility with smart thermostats
• Upon request, sends live control data and history to R.W. Beckett Technical Support when troubleshooting
• Auto-configures valve-on delay timing for a solenoid valve upon detection

Technical Information

Power Voltage

• Voltage: 120 Vac Nominal (102-132 Vac)

• Current: 100 mA plus burner motor, igniter, and valve loads

• Frequency: 60 Hz

Inputs

• Combustion Air/Blocked Vent

  • (Front side): 10mA @ 24Vac min

  • (Underside): 1.9mA @ 120Vac min

• Thermostat Anticipator Current: 0.1 A

• Thermostat Voltage: 24 Vac

Outputs

• Motor: 120 Vac, 10 full load amps (FLA*), 60 locked rotor amps (LRA) Note: Reduce motor FLA rating by igniter and valve currents

• Igniter: 120 Vac, 3 A

• Solenoid Valve: 120 Vac, 1 A

Environmental Ratings

• Storage Ambient Temperature: -40°F to +150°F (-40°C to +65°C)

• Operating Ambient Temperature: -40°F to +150°F (-40°C to +65°C)

• Moisture: 5 to 95% RH, non-condensing and non-crystallizing

• Approvals: Underwriters Laboratory Recognition per UL 60730-1, UL 60730-2-5, CSA E60730-1, C22.2 NO. 60730-2-5